Full-service asphalt and concrete care for driveways, parking lots, HOA communities, and industrial properties across the GTA. Every job is run by our own crew, with commercial-grade materials and the prep work to back them up.
A fresh coat of sealer is hands-down the cheapest way to add years to your asphalt. It forms a tough barrier against UV oxidation, rain, oil, and the slow grind of daily traffic. Stick to a two-to-three-year reapplication schedule and you can roughly double the life of your pavement before you ever need to think about resurfacing.
Every untreated crack is an open invitation for water to reach the base of your asphalt. One Canadian winter later, that trapped water freezes, expands, and a small crack becomes a serious pothole. Our crew routs each crack, blows it clean, and pours hot rubberized sealant that flexes with temperature swings instead of cracking back open.
Crisp, high-contrast pavement markings keep traffic moving and your property looking maintained. We re-stripe existing layouts after a sealcoat or design new ones from the ground up, including accessible stalls, fire lanes, arrows, stop bars, and painted curbs that hold their colour through the winter.
Failed asphalt is more than an eyesore. It is a slip hazard, a vehicle damage claim waiting to happen, and a liability you do not want on the books. We saw-cut the failed area to a clean square, fix the base underneath if it has gone soft, and patch with hot-mix or infrared methods so the repair blends in and stays put.
Sealer is only as good as what it bonds to. That is why every job we take on starts with a serious clean, including power blowing, edging, and targeted power-washing anywhere oil stains or vegetation have set in. Skip this step and the best sealer in the world will lift in a season.
For property managers and HOA boards juggling several lots, we build multi-year maintenance plans that turn unpredictable repair bills into a steady annual budget. When a full closure is off the table, we phase the work across nights, weekends, or section-by-section so tenants stay parked and residents keep moving.
Interlocking brick and pavers only stay solid as long as the joints between them do. We refill washed-out joint sand, re-compact the surface, and finish with a penetrating sealer that hardens the joints, fights back against weeds, and brings the original colour back to faded brick.
Stamped concrete looks incredible when it is freshly sealed and tired the moment the coating wears off. Once that protective layer is gone, the colour fades fast and the surface starts taking on stains and hairline cracks. We apply high-solids acrylic or polyurethane sealers that restore the colour, bring back the sheen, and shield the surface from freeze-thaw damage and de-icing salts.
Exposed-aggregate driveways and patios take a beating from sun, traffic, and winter salt, and over time the stones start working themselves loose. A proper clear sealer locks the aggregate back in, deepens the natural colour, and keeps the surface looking sharp through season after season.
